#include <Wire.h>
#include <DS3231.h>
#include <SoftwareSerial.h>
#include <DFPlayer_Mini_Mp3.h>
#include <Button.h>
DS3231 rtc(SDA, SCL);
Time t;
uint8_t hh = 0, mm = 0, ss = 0;
SoftwareSerial mySerial(11, 10); // Declare pin RX & TX
#define BUTTON8 8 // tombol ON
#define PULLUP true
#define INVERT true
#define DEBOUNCE_MS 20
Button btn1(BUTTON8, PULLUP, INVERT, DEBOUNCE_MS);
int b1 = 3; //tombol on/off
const int busyPin = 5; //Dfplayer -busypin will be HIGH if mp3 stop play
int busyStatus =0;
int led = 13;
void setup() {
Serial.begin(57600);
pinMode (busyPin, INPUT);
pinMode(b1, INPUT_PULLUP);
rtc.begin();
mySerial.begin (9600);
mp3_set_serial (mySerial); //set softwareSerial for DFPlayer
delay(10);
mp3_reset();
delay(10); //wait 1ms for respon command
mp3_set_volume (30); //Set volume value. From 0 to 30
delay(500);
pinMode(led, OUTPUT);
digitalWrite(led, LOW);
//rtc.setTime(8, 38, 0); // Set the time to 12:00:00 (24hr format)
//rtc.setDate(25, 5, 2018); // Set the date to January 1st, 2014
}
void loop() {
t = rtc.getTime(); // gate all data time & date from RTC
hh = t.hour, DEC; //pengambilan data jam
mm = t.min, DEC; //pengambilan data menit
ss = t.sec, DEC; //pengambilan data detik
Serial.print(hh);
Serial.print(":");
Serial.print(mm);
Serial.print(":");
Serial.println(ss);
delay(1000);
Serial.println(digitalRead(busyPin));
if (btn1.read() == 1 ) { // nyalain mp3
digitalWrite(led, HIGH);
mp3_play(1);
delay(1000);
digitalWrite(led, LOW);
//delay(56000);
}
if (hh >= 6 && hh <= 22 ) {
busyStatus = digitalRead(busyPin);
if ( busyStatus == HIGH ) {
mp3_play(1);
digitalWrite(led, HIGH);
}
}
else {
mp3_stop();
digitalWrite(led, LOW);
}
}